AK -1300 THE ROLL SACK MACHINE WITH PERFORATOR

Technical Details

This machine is suitable for making heavy duty bags from roll to roll with  LLDPE, LDPE, MLDPE, HDPE, EVA, CPP, OPP, PP, PE and PA  materials. *

Thickness of the film can be welded:

Minimum 40 microns (2x20-  Double layers Tubular form),

Maximum 1000 microns (2x500-Tubular form or  4x250-Gusseted tubing form) *

The length of the film can be processed:

Minimum 5cm (50mm)

Maximum 9999,9cm(999999mm)

PLC controlled operation control panel

TFT screen with touchpad

Single unwinder, Double winder

Holders of bobbin with pneumatic shaft

Three independent rezistance wires(heater) can use independently for making a weld and controlled by digital impulse control system

1. heater  -    2. heater  -    3. heater 

1. and 2. heaters  

1. and 3. heaters

2. and 3. heaters

Only Perforation is possible without welding

Only Transfering is possible without measurement

Maximum 800 mm diameter of bobbin can be loaded on unwinder shaft

Maximum 550 mm diameter of bobbin can be loaded on winder shafts

Maximum 300 kg. of bobbin can be loaded on unwinder and winder shafts

Diameter(outside) of shaft(winder/unwinder); 70mm ” it is for 76mm (inner diameter) of carton bobbin”

A.C. motor speed control drivers

Output digital counter (mm measurement)

Alarm for resistance wire breake

Emergency auto-stop system with reflective photocell

Optionally; Color photocell can be affixed for printed products

Optionally; Static electricity receiver bar

Banana Rollers For Properly Wrapping.

Air blowing system for jaw.

Power Consumption;  During working time it is between 1,0- 2,5kW

Total power; 3P 380V+N+MP, 8,80 kW, 50Hz

Total air supply; 6-8 bar

It is possible to produce one side open bag on two separate bobbin with cold slicing knife

Shaft safety chucks 

MODEL

AK1300 – 100

AK1300 – 125

AK1300 – 150

AK1300 – 175

AK1300 – 200

AK1300 – 220

AK1300 - 240

AK1300 - 260

Çalışma Genişliği

-------------

Working

Width

Maksimum 950mm

Maksimum 1200mm

Maksimum 1450mm

Maksimum 1700mm

Maksimum 1950mm

Maksimum 2150mm

Maksimum 2350mm

Maksimum 2550mm

Makine

Genişliği

------------

Machine

Width

2170 mm

2170 mm

2170 mm

2170 mm

2170 mm

2170 mm

2170 mm

2170 mm

Makine

Uzunluğu

--------------

Machine

Length

1760 mm

2010 mm

2260 mm

2510 mm

2760 mm

2960 mm

3160 mm

3360 mm

Makine Yüksekliği

----------------

Machine

Height

1520 mm

1520 mm

1520 mm

1520 mm

1520 mm

1520 mm

1520 mm

1520 mm

Makine Ağırlığı

--------------

Machine

Weight

1050 kg

1150 kg

1250 kg

1350 kg

1450 kg

1550 kg

1650 kg

1750 kg

Üretim Hızı

(adet/dakika) *

 

----------------

 

Production Speed

(pieces/minute) *

 

For 1000 mm bag lenght  14 – 17 pcs / min. ( Depends on thickness and quality of film ) / 1000 mm torba uzunluğunda 14 – 17 adet / dk. ( Film kalınlığına ve kalitesine bağlı )

For 1500 mm bag lenght  12 – 15 pcs / min. ( Depends on thickness and quality of film ) / 1500 mm torba uzunluğunda 12– 15 adet / dk. ( Film kalınlığına ve kalitesine bağlı )

For 2000 mm bag lenght  11 – 14 pcs / min. ( Depends on thickness and quality of film ) / 2000 mm torba uzunluğunda 11 – 14 adet / dk. ( Film kalınlığına ve kalitesine bağlı )

For 2500 mm bag lenght  10 – 13 pcs / min. ( Depends on thickness and quality of film ) / 2500 mm torba uzunluğunda 10 – 13 adet / dk. ( Film kalınlığına ve kalitesine bağlı )

For 3000 mm bag lenght  9 – 12 pcs / min. ( Depends on thickness and quality of film ) / 3000 mm torba uzunluğunda 9 – 12 adet / dk. ( Film kalınlığına ve kalitesine bağlı )

Welding quality and production speed can be changeable depending on the micron thickness of the product and the quality of the material to be processed.